Penn State DuBois CPMT Scholarship Report 2023 (pdf)
Development of Localized Laser Preheating of AA6061 Powder as a Selective Laser Melting Technique to Improve Mechanical Properties of 3D Printed Parts (pdf)
Heat Treatment and Microstructure Evolution of LPBF Fabricated Ti-6AI-4V (pdf)
Simulation as a Supplemental Resource for Minimizing Sintering Distortion of BJP Titanium Parts (pdf)
M5X4 – A Family of MXenes (pdf)
The Effects of Sintering Conditions on the Explosion of CW0350 Parts (pdf)
Low-Cost Alternative to Ti-6Al-4V Powder for Additive Manufacturing (pdf)
Effectiveness of Silver Coated Copper Powder as an Interlayer for Diffusion Bonding of Silver-Graphite on Copper (pdf)
Numerical Modeling of the Selective Laser Melting Process via Finite Element Analysis (pdf)
Below are technical project reports from CPMT and Howard I Howard I. Sanderow Scholarship recipients.
Development of AlSi10Mg-AlN Metal Matrix Composites For Laser Powder Bed Fusion AM (pdf)
Al/Ca MMC Wires for Overhead Power Transmission (pdf)
Enhanced Properties of Iron-Based PM Parts via High-Speed Mixing of Powders (pdf)
Rate Dependance of Compacts with Viscoplastic Powder Particles (pdf)
Development of LPF-AM Processing Parameters for Beta, Near-Beta and Near-Alpha Titanium Alloys (pdf)
Effects of AM Processing Methods on Three Alloys (pdf)
A review of the Lubricant Removal Technology as compared to Conventional Continuous Sintering Furnaces (pdf)
Influence of SLM Processing Parameters on Mechanical Properties of Tungsten-Heavy Alloy (pdf)
Influence of SLM Processing Parameters on Mechanical Properties of Tungsten Heavy Alloys (pdf)
The Effect of Laser Engraving on the Mechanical Behavior of Powder Metallurgy Components (pdf)
Assessment of Diffusion Bonding of Silver-Graphite-Copper Composite with Varying Atmospheres (pdf)
Anion adsorption, Ti3C2Tz MXene multilayers and clay-like swelling (pdf)
Effect of Heat Treatment on Mechanical and Corrosion Properties of PM Steels Post-Sinter (pdf)
The Design and Testing of Selective Laser Melted 4340 Steel Compression Samples (pdf)
The Use of an Interrupted Quench to Examine the Effects of Heat Treatment on Aluminum Alloy PM 2618 (pdf)
Wall Friction in Powder Compaction Material and Transient Effects (pdf)
Metallurgical Assessment of an Emerging Al-Cu-Mg PM Alloy (pdf)
Press and Sinter Response of Al-Cu Binary Alloys (pdf)
Simple Compression of Brittle Powder Compacts (pdf)
Examining Mechanical Properties and Surface Treatments of Selective Laser Melted Cu-4.3Sn (pdf)
The Effects of Processing Paramaters on Sinter-Bonding of Silver Graphite to Copper (pdf)
PM Alternative to Casting in Jewelry Industry (pdf)
The Relationship Between Microstructure, Processing, and Final Properties of Copper-Based Alloys Fabricated via Selective Laser Melting (pdf)
Die-Less MIM-style Additive Manufacturing with Controlled Porosity: a Proof of Concept (pdf)
On the Benefits of Using a STRECON Die for the Compaction of Powder Metals (pdf)
Development of Ballistic Impact Device for Measuring the Impact Energy of Powder-Metal Bullets (pdf)
Investigation into Air Sintered Porous Silicon Nitride (pdf)
Sintering of Titanium and Blended Titanium Alloys (pdf)
Optimization of Aluminum Alloy PM2618 for High Temperature Exposure (pdf)
A Study of Additive Diffusion in Ferrous Powder Metal Compacts Using Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (pdf)
Development of Spark Plasma Erosion to Enable Scalable Direct Synthesis of High Temperature Performance Nano-Particulate Materials for Energy Storage Applications (pdf)
The Effect of Machining Additives on the Microstructure and Hardness of PM Alloy FC-0208 (pdf)
Influence of Temperature on the Compaction and Strength of Some Pharmaceutical Excipients (pdf)
Metal Matrix Composites Via PM Routes (pdf)
Study of Additive Diffusion in Ferrous Powder Metal Compacts (pdf)
Assessment of a Novel Lubricant for Emerging Aluminum (pdf)
PM Alloys Intense Pulse Light Sintering of Tungsten (pdf)
Powder Metal Microstructure of Stainless Steel with Additives (pdf)
The Effect of Machining Additives on the Machinability of PM Alloy FC-0208 (pdf)